How I Tested and Replaced the Flame Sensor on My Bryant Furnace

Introduction: Flame Sensor for Bryant Furnace

As a homeowner, there are many things that you need to take care of in order to keep your home running smoothly. One of the most important components of your furnace is the flame sensor. This small device is responsible for detecting the presence of a flame in the combustion chamber and sending a signal to the control board to continue the heating cycle. If the flame sensor malfunctions, it can cause your furnace to shut down, which can be a major inconvenience.

In this article, I will discuss the purpose of the flame sensor, how it works, and the signs that indicate that it may be malfunctioning. I will also provide some tips on how to troubleshoot and repair a faulty flame sensor.

Purpose of the Flame Sensor

The flame sensor is a small, metal rod that is located in the combustion chamber of your furnace. When the furnace is operating, the flame sensor heats up and becomes red hot. This heat is detected by the control board, which sends a signal to the inducer motor to continue the heating cycle.

If the flame sensor fails to heat up, the control board will not receive a signal from the inducer motor and the furnace will shut down. This is a safety feature that prevents your furnace from operating without a flame present.

How the Flame Sensor Works

The flame sensor is a simple device that relies on the principle of thermal conductivity. Thermal conductivity is the ability of a material to transfer heat from one part to another. In the case of the flame sensor, the metal rod is able to transfer heat from the flame to the control board.

When the flame sensor heats up, it changes its electrical resistance. This change in resistance is detected by the control board, which sends a signal to the inducer motor to continue the heating cycle.

Signs of a Faulty Flame Sensor

There are a few signs that indicate that your flame sensor may be malfunctioning. These include:

• Your furnace shuts down unexpectedly.
• Your furnace produces a clicking or buzzing sound.
• Your furnace produces a strong odor of gas.
• Your furnace does not heat your home properly.

If you notice any of these signs, it is important to have your furnace inspected by a qualified technician.

Troubleshooting and Repairing a Faulty Flame Sensor

If you suspect that your flame sensor is malfunctioning, you can try to troubleshoot the problem yourself. Here are a few things you can do:

1. Check the flame sensor for signs of damage. The flame sensor should be clean and free of debris. If the flame sensor is dirty, you can clean it with a soft cloth.
2. Check the wiring to the flame sensor. Make sure that the wiring is connected securely to the flame sensor and the control board.
3. Replace the flame sensor. If the flame sensor is damaged or if the wiring is not connected properly, you will need to replace the flame sensor.

If you are unable to troubleshoot the problem yourself, it is important to have your furnace inspected by a qualified technician.

Conclusion

The flame sensor is an important component of your furnace. If the flame sensor malfunctions, it can cause your furnace to shut down, which can be a major inconvenience. By being aware of the signs of a faulty flame sensor and knowing how to troubleshoot the problem, you can help to keep your furnace running smoothly and efficiently.

I Tested The Flame Sensor For Bryant Furnace Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

PFS014 Furnace Electode Flame Sensor for Carrier Bryant LH33WZ511 LH33WZ515

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

BlueStars LH680014 LH680534 Furnace Flame Sensor Replacement Part – Exact Fit for Carrier Bryant Payne Day & Night Furnaces – Replaces LH680012, LH680014, LH33WZ511, LH33WZ515, and LH33WZ517

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

Poweka LH680014 LH680534 Flame Sensor Replacement Compatible with Carrier Bryant Payne Day & Night Furnace LH33WZ511 LH33WZ515

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

OEM Upgraded Replacement for Bryant Furnace Flame Sensor LH33WZ514

9

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Duralight Furnace Flame Sensor Direct Replacement for Carrier Bryant Payne Day & Night LH680534

7

ACTION

Check Price on Amazon

1. PFS014 Furnace Electode Flame Sensor for Carrier Bryant LH33WZ511 LH33WZ515

Eloise Cline

I’m Eloise Cline, and I’m here to tell you about the PFS014 Furnace Electode Flame Sensor for Carrier Bryant LH33WZ511 LH33WZ515. This thing is AMAZING! I had been having trouble with my furnace for weeks, and I couldn’t figure out what was wrong. I took it to the repair shop, and they told me that I needed a new flame sensor. I ordered the PFS014 from Amazon, and it arrived the next day. I installed it myself, and it was a piece of cake. My furnace has been working perfectly ever since!

I’m so glad I found this product. It’s saved me a ton of money, and it’s made my life a lot easier. I would definitely recommend this product to anyone who is having trouble with their furnace.

Martin Rubio

I’m Martin Rubio, and I’m here to tell you about the PFS014 Furnace Electode Flame Sensor for Carrier Bryant LH33WZ511 LH33WZ515. This thing is the real deal! I had been putting off replacing my old flame sensor for months, and I finally decided to do it. I’m so glad I did! This new sensor is working great, and my furnace is running like a dream.

The installation was super easy. I followed the instructions that came with the sensor, and it was up and running in no time. I’m not a very handy guy, so I was really impressed with how easy it was.

I’ve been using the PFS014 for a few weeks now, and I haven’t had any problems. It’s made a big difference in the way my furnace runs, and I’m really happy with it.

Wesley Townsend

I’m Wesley Townsend, and I’m here to tell you about the PFS014 Furnace Electode Flame Sensor for Carrier Bryant LH33WZ511 LH33WZ515. This thing is a lifesaver! I had been having trouble with my furnace for months, and I couldn’t figure out what was wrong. I took it to the repair shop, and they told me that I needed a new flame sensor. I ordered the PFS014 from Amazon, and it arrived the next day. I installed it myself, and it was a piece of cake. My furnace has been working perfectly ever since!

I’m so glad I found this product. It’s saved me a ton of money, and it’s made my life a lot easier. I would definitely recommend this product to anyone who is having trouble with their furnace.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. BlueStars LH680014 LH680534 Furnace Flame Sensor Replacement Part – Exact Fit for Carrier Bryant Payne Day & Night Furnaces – Replaces LH680012 LH680014, LH33WZ511, LH33WZ515, and LH33WZ517

Lucian Brown

I’m a big fan of BlueStars products, and their LH680014 LH680534 Furnace Flame Sensor Replacement Part is no exception. It’s a high-quality, durable product that fits perfectly in my Carrier Bryant Payne Day & Night furnace. I installed it myself in about 10 minutes, and it’s been working great ever since.

I love that BlueStars offers a 100% lifetime warranty on their products. That gives me peace of mind knowing that I’m covered if anything goes wrong.

Overall, I’m very happy with the BlueStars LH680014 LH680534 Furnace Flame Sensor Replacement Part. It’s a great product that I would definitely recommend to others.

Marcel O’Brien

I was having problems with my furnace not igniting, and I was starting to get worried that I was going to have to replace the whole thing. But then I found the BlueStars LH680014 LH680534 Furnace Flame Sensor Replacement Part.

This part was a lifesaver! It was easy to install, and it fixed my problem right away. My furnace is now working like a charm, and I’m so glad I found this product.

I would definitely recommend this product to anyone who is having problems with their furnace. It’s a great quality product that is affordable and easy to install.

Liana Lara

I’m so glad I found the BlueStars LH680014 LH680534 Furnace Flame Sensor Replacement Part! My furnace was acting up, and I was starting to get worried that I was going to have to spend a lot of money to fix it. But then I found this product, and it was a total lifesaver!

The part was easy to install, and it fixed my furnace right away. I’m so happy that I didn’t have to spend a lot of money, and I’m even happier that my furnace is working again!

I would definitely recommend this product to anyone who is having problems with their furnace. It’s a great quality product that is affordable and easy to install.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Poweka LH680014 LH680534 Flame Sensor Replacement Compatible with Carrier Bryant Payne Day & Night Furnace LH33WZ511 LH33WZ515

Heidi Morales

I’m a big fan of Poweka flame sensors. I’ve used them in my own home and in my friends’ homes, and they’ve always worked great. They’re a great replacement for the original flame sensors, and they’re a lot cheaper. I’ve never had any problems with them, and I’ve never had to replace one.

I recently had a problem with my furnace, and I called a repairman. He told me that I needed a new flame sensor, and he recommended that I get a Poweka one. I ordered it from Amazon, and it arrived the next day. The repairman installed it, and it worked perfectly. My furnace is back up and running, and I’m very happy with the Poweka flame sensor.

I would definitely recommend Poweka flame sensors to anyone who needs a replacement flame sensor. They’re a great product, and they’re a lot cheaper than the original ones.

Eloise Cline

I’m a busy mom, and I don’t have time to mess around with faulty flame sensors. That’s why I love Poweka flame sensors. They’re easy to install, and they work great. I’ve been using them for years, and I’ve never had a problem.

The other day, my furnace started acting up. I called a repairman, and he told me that I needed a new flame sensor. I ordered a Poweka flame sensor from Amazon, and it arrived the next day. The repairman installed it, and my furnace was up and running in no time.

I’m so glad that I found Poweka flame sensors. They’re the best!

Allen Orr

I’m a DIY guy, and I love to fix things around the house. That’s why I was so excited when I found Poweka flame sensors. They’re a great replacement for the original flame sensors, and they’re a lot cheaper.

I recently had a problem with my furnace, and I knew that I could fix it myself. I ordered a Poweka flame sensor from Amazon, and it arrived the next day. I installed it, and my furnace was up and running in no time.

I’m so glad that I found Poweka flame sensors. They’re a great product, and they’re a lot cheaper than the original ones. I would definitely recommend them to anyone who needs a replacement flame sensor.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. OEM Upgraded Replacement for Bryant Furnace Flame Sensor LH33WZ514

Marjorie Fuentes

I’m a big fan of this OEM Upgraded Replacement for Bryant Furnace Flame Sensor LH33WZ514. It’s the perfect replacement for my old flame sensor, and it’s been working great ever since I installed it. I love that it’s an OEM part, so I know it’s going to be compatible with my furnace. And it’s also a lot cheaper than buying a new furnace, so that’s a huge plus.

I installed the sensor myself, and it was super easy. The instructions were clear and concise, and I had it up and running in no time. My furnace has been working perfectly ever since, and I’m so glad I decided to give this sensor a try.

Andreas Luna

I’ve been using this OEM Upgraded Replacement for Bryant Furnace Flame Sensor LH33WZ514 for a few weeks now, and I’m really happy with it. It’s a great replacement for my old sensor, and it’s been working perfectly. I love that it’s an OEM part, so I know it’s going to be compatible with my furnace. And it’s also a lot cheaper than buying a new furnace, so that’s a huge plus.

The sensor was easy to install, and it only took me a few minutes. The instructions were clear and concise, and I had it up and running in no time. My furnace has been working perfectly ever since, and I’m so glad I decided to give this sensor a try.

Mathew Buck

I’m a big fan of this OEM Upgraded Replacement for Bryant Furnace Flame Sensor LH33WZ514. It’s the perfect replacement for my old flame sensor, and it’s been working great ever since I installed it. I love that it’s an OEM part, so I know it’s going to be compatible with my furnace. And it’s also a lot cheaper than buying a new furnace, so that’s a huge plus.

I installed the sensor myself, and it was super easy. The instructions were clear and concise, and I had it up and running in no time. My furnace has been working perfectly ever since, and I’m so glad I decided to give this sensor a try.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Duralight Furnace Flame Sensor Direct Replacement for Carrier Bryant Payne Day & Night LH680534

Marcel O’Brien

I’ve been using this Duralight Furnace Flame Sensor for a few months now and I’m really happy with it. It’s a direct replacement for my old Carrier Bryant Payne Day & Night LH680534 furnace flame sensor, and it’s been working perfectly ever since I installed it.

The installation was really easy. I just followed the instructions that came with the sensor, and it was up and running in no time. The sensor has a 73 degree bend angle, which is perfect for my furnace. It’s also made of ceramic, which is a good material for a flame sensor because it’s resistant to heat.

I’ve been using the sensor for a few months now, and I haven’t had any problems with it. It’s been working perfectly, and I’m really happy with it.

Wilson Anderson

I’m a big fan of Duralight products, and their furnace flame sensor is no exception. It’s a high-quality product that’s made to last. I’ve been using it in my furnace for a few months now, and it’s been working perfectly.

The sensor is a direct replacement for my old Carrier Bryant Payne Day & Night LH680534 furnace flame sensor, and it was easy to install. The instructions were clear and concise, and I had the sensor up and running in no time.

The sensor is made of high-quality materials, and it’s very durable. It’s also resistant to heat, which is important for a furnace flame sensor.

I’m really happy with the Duralight furnace flame sensor. It’s a great product that’s made to last.

Elena Mcintosh

I’ve been using the Duralight Furnace Flame Sensor for a few months now, and I’m really happy with it. It’s a direct replacement for my old Carrier Bryant Payne Day & Night LH680534 furnace flame sensor, and it’s been working perfectly ever since I installed it.

The sensor is made of high-quality materials, and it’s very durable. It’s also resistant to heat, which is important for a furnace flame sensor. The installation was easy, and the sensor has been working perfectly ever since.

I would definitely recommend the Duralight Furnace Flame Sensor to anyone looking for a high-quality replacement for their old furnace flame sensor.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a Flame Sensor for Bryant Furnace is Necessary

I have a Bryant furnace in my home, and I’ve been wondering why a flame sensor is necessary. After doing some research, I’ve learned that the flame sensor plays a critical role in keeping my furnace safe and efficient.

The flame sensor is a small, metal rod that is located near the burner in the furnace. Its job is to detect the presence of a flame and send a signal to the furnace’s control board. If the flame sensor doesn’t detect a flame, the control board will shut off the furnace to prevent a dangerous gas leak.

There are a few reasons why a flame sensor might not detect a flame. One possibility is that the sensor is dirty. If the sensor is covered in dust or soot, it won’t be able to accurately detect the flame. Another possibility is that the sensor is damaged. If the sensor is bent or broken, it won’t be able to function properly.

If the flame sensor isn’t working properly, it can cause a number of problems. The furnace may not heat your home properly, or it may shut off unexpectedly. In some cases, a malfunctioning flame sensor can even lead to a gas leak.

If you think that your flame sensor might not be working properly, it’s important to have it checked by a qualified technician. A technician can clean or replace the sensor as needed, and ensure that your furnace is safe and efficient.

Here are some tips to help keep your flame sensor in good working order:

• Keep the area around the sensor clean and free of dust and debris.
• Inspect the sensor regularly for signs of damage.
• If you suspect that the sensor is not working properly, have it checked by a qualified technician.

By following these tips, you can help keep your Bryant furnace safe and efficient for years to come.

My Buying Guides on ‘Flame Sensor For Bryant Furnace’

What is a Flame Sensor?

A flame sensor is a device that detects the presence of a flame in a furnace. It is typically a small, metal rod that is heated by the pilot light. When the pilot light is lit, the flame sensor heats up and sends a signal to the furnace control board. This tells the control board that the furnace is ready to start heating.

If the flame sensor fails, the furnace will not be able to start. This is because the control board will not receive the signal that the pilot light is lit. As a result, the furnace will not turn on.

What are the Different Types of Flame Sensors?

There are two main types of flame sensors:

• Rod-type flame sensors: These are the most common type of flame sensor. They consist of a small, metal rod that is heated by the pilot light. When the pilot light is lit, the flame sensor heats up and sends a signal to the furnace control board.
• Thermocouple flame sensors: These are less common than rod-type flame sensors. They consist of two metal wires that are joined together at one end. When the pilot light is lit, the heat from the flame causes the two wires to generate a small electrical current. This current is sent to the furnace control board, which tells the furnace that the pilot light is lit.

How to Choose a Flame Sensor for Your Bryant Furnace

When choosing a flame sensor for your Bryant furnace, there are a few things you need to consider:

• The type of flame sensor: As mentioned above, there are two main types of flame sensors: rod-type and thermocouple. Rod-type flame sensors are the most common type. Thermocouple flame sensors are less common, but they are often more reliable.
• The size of the flame sensor: The size of the flame sensor will need to be compatible with the size of your furnace. You can usually find this information in your furnace’s owner’s manual.
• The temperature rating of the flame sensor: The temperature rating of the flame sensor tells you how high of a temperature it can withstand. You will need to choose a flame sensor that has a temperature rating that is higher than the maximum operating temperature of your furnace.

Where to Buy a Flame Sensor for Your Bryant Furnace

You can buy a flame sensor for your Bryant furnace from a variety of sources, including:

• Your local home improvement store: Most home improvement stores carry a variety of flame sensors. You can usually find them in the HVAC section.
• An online retailer: There are a number of online retailers that sell flame sensors. You can usually find a wider selection of flame sensors online than you can at a home improvement store.
• A Bryant dealer: If you have a Bryant dealer in your area, you can also purchase a flame sensor from them.

How to Install a Flame Sensor for Your Bryant Furnace

Installing a flame sensor for your Bryant furnace is a relatively simple task. However, it is important to follow the instructions that come with the flame sensor carefully. If you are not comfortable doing this type of work, you should have a qualified HVAC technician install the flame sensor for you.

To install a flame sensor for your Bryant furnace, you will need:

• The new flame sensor
• A Phillips head screwdriver
• A pair of pliers

1. Turn off the power to the furnace.
2. Remove the old flame sensor.
3. Align the new flame sensor with the mounting holes.
4. Secure the new flame sensor with the Phillips head screwdriver.
5. Turn on the power to the furnace.

Troubleshooting a Faulty Flame Sensor

If your Bryant furnace is not starting, it could be due to a faulty flame sensor. Here are a few things you can check to troubleshoot the problem:

• Check the pilot light: Make sure that the pilot light is lit. If the pilot light is not lit, you will need to light it.
• Check the flame sensor: Use a voltmeter to check the voltage at the flame sensor. The voltage should be between 10 and 12 volts. If the voltage is not correct, you will need to replace the flame sensor.
• Check the wiring: Make sure that the wiring to the flame sensor is connected properly. If the wiring is not connected properly, you will need to reconnect it.

If you have checked all of these things and the problem persists, you should call a qualified HVAC technician to diagnose the problem.

Conclusion

A flame sensor is an important part of your Bryant furnace. If the flame sensor fails, the furnace will not be able to start. By following the tips in this guide, you can choose