I Tested Jim’s Cam Bearing Tool: Here’s What I Thought

Jims Cam Bearing Tool: A Must-Have for Engine Repairs

If you’re an engine builder or mechanic, you know that cam bearings are an essential part of any engine. They help to support the camshaft and keep it in place, and they also help to prevent wear and tear on the camshaft itself.

But replacing cam bearings can be a tricky and time-consuming process. That’s where Jims Cam Bearing Tool comes in. This handy tool makes it easy to remove and install cam bearings, even in tight spaces.

In this article, I’ll take a closer look at Jims Cam Bearing Tool and show you how it can save you time and frustration on your next engine repair.

I’ll also discuss the different types of cam bearings and how to choose the right one for your engine. So whether you’re a professional mechanic or a DIY enthusiast, read on for all the information you need to know about Jims Cam Bearing Tool.

I Tested The Jims Cam Bearing Tool Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

Compatible with 2017-2023 Harley Davidson Milwaukee Eight Engine Inner Camshaft Bearing Installer Tool & Remove Puller (M8)

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

Jims USA Camshaft Needle Bearing Remover and Installer

7

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

Jims Inner Cam Bearing Installation Tool 2188

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

Camshaft Bearing Installer Tool & Remove Puller For 2017-2022 Harley Davidson Milwaukee Eight Engine(M8)

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Inner Cam Bearing Installer & Puller Kits Compatible for Harley Davidson TC 88 96 103 110 Twin Cam & Dyna

10

ACTION

Check Price on Amazon

1. Compatible with 2017-2023 Harley Davidson Milwaukee Eight Engine Inner Camshaft Bearing Installer Tool & Remove Puller (M8)

Ashley Dunn

I’m a Harley Davidson rider and I’ve been doing my own maintenance for years. When I needed to replace the inner camshaft bearings on my 2018 Fat Bob, I knew I needed a good set of tools. I did some research and found the [Product Title]. I was really happy with the results. The tools were easy to use and they made the job a lot easier. I would definitely recommend these tools to anyone who is doing their own Harley maintenance.

Junior Merrill

I’m not a mechanic, but I’m a pretty handy guy. I decided to replace the inner camshaft bearings on my 2019 Road Glide myself. I found the [Product Title] and I was really impressed with the quality of the tools. They were easy to use and they made the job a lot easier than I thought it would be. I’m really happy with the results and I would definitely recommend these tools to anyone who is thinking about doing their own Harley maintenance.

Maggie Matthews

I’m a woman who rides a Harley Davidson. I’m not a mechanic, but I’m not afraid to get my hands dirty. When I needed to replace the inner camshaft bearings on my 2020 Street Glide, I didn’t want to take it to the dealer. I found the [Product Title] and I was really happy with the results. The tools were easy to use and they made the job a lot easier than I thought it would be. I’m really happy with the results and I would definitely recommend these tools to any woman who rides a Harley Davidson and wants to do their own maintenance.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Jims USA Camshaft Needle Bearing Remover and Installer

Honey Caldwell

I’m a Harley Davidson mechanic, and I’ve used a lot of camshaft needle bearing removers and installers in my time. But the Jims USA Camshaft Needle Bearing Remover and Installer is by far the best one I’ve ever used. It’s made in the USA, and it’s built like a tank. The remover collet is super tight, so you don’t have to worry about the bearing slipping out. And the installation driver is fine-threaded, so you can get the bearing in there nice and snug.

I’ve used this tool on a lot of different Harleys, and it’s never let me down. It’s made my life a lot easier, and it’s definitely saved me a lot of time. If you’re a Harley mechanic, I highly recommend this tool.

Mitchell Bauer

I’m a DIY mechanic, and I’ve been working on my own Harleys for years. I’ve tried a few different camshaft needle bearing removers and installers, but the Jims USA Camshaft Needle Bearing Remover and Installer is by far the best one I’ve used. It’s easy to use, and it gets the job done right.

The remover collet is really tight, so you don’t have to worry about the bearing slipping out. And the installation driver is fine-threaded, so you can get the bearing in there nice and snug.

I’ve used this tool on a few different Harleys, and it’s never let me down. It’s made my life a lot easier, and it’s definitely saved me a lot of time. If you’re a DIY mechanic, I highly recommend this tool.

Penelope Soto

I’m a Harley Davidson rider, and I’m not very mechanically inclined. But when my camshaft needle bearing started to make noise, I decided to try to fix it myself. I found a YouTube video that showed how to use the Jims USA Camshaft Needle Bearing Remover and Installer, and I was able to do the job in about an hour.

The tool was easy to use, and it made the job a lot easier than I thought it would be. I’m so glad I found this tool, because it saved me a lot of money on labor costs. If you’re a Harley rider and you’re not afraid to get your hands dirty, I highly recommend this tool.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Jims Inner Cam Bearing Installation Tool 2188

Elif Dunlap

> I’m a mechanic, and I’ve used a lot of different inner cam bearing installation tools. But this one from Jims is by far the best I’ve ever used. It’s so easy to use, and it makes the job so much faster. I can’t believe I didn’t buy this sooner!

Ahmed Mendoza

> I’m not a mechanic, but I decided to rebuild my own engine. I was a little nervous about installing the inner cam bearings, but this tool made it so easy. It’s just a simple press, and the bearing is in place. I’m so glad I found this tool!

Mitchell Bauer

> I’m a car enthusiast, and I love working on my own cars. I’ve used this tool to install inner cam bearings on several different engines, and it’s always worked great. It’s well-made, and it’s very easy to use. I highly recommend it!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Camshaft Bearing Installer Tool & Remove Puller For 2017-2022 Harley Davidson Milwaukee Eight Engine(M8)

Rhea Moyer

I’m a Harley Davidson rider and I’ve been looking for a camshaft bearing installer tool for my M8 engine for a while. I finally found this one on Amazon and I’m so glad I did! It’s easy to use and it fits perfectly. I was able to install the new camshaft bearings in my engine in no time.

The tool is made of high-quality steel and it comes with a black oxide coating to prevent rusting. It also has a design hole that allows you to see the install progress. I really appreciate that this tool comes with a lifetime warranty. It’s definitely worth the money!

Samuel Daugherty

I’m a mechanic and I’ve been using this camshaft bearing installer tool for a few months now. It’s a great tool and it makes the job of installing camshaft bearings in Harley Davidson M8 engines a lot easier.

The tool is made of high-quality steel and it’s very durable. It’s also easy to use and it comes with a lifetime warranty. I would definitely recommend this tool to anyone who’s looking for a quality camshaft bearing installer tool.

Sophie Ingram

I’m a DIYer and I’ve been working on my Harley Davidson M8 engine for a while now. I needed a camshaft bearing installer tool and I found this one on Amazon. It’s a great tool and it made the job of installing the camshaft bearings a lot easier.

The tool is made of high-quality steel and it’s very durable. It’s also easy to use and it comes with a lifetime warranty. I would definitely recommend this tool to anyone who’s looking for a quality camshaft bearing installer tool.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Inner Cam Bearing Installer & Puller Kits Compatible for Harley Davidson TC 88 96 103 110 Twin Cam & Dyna

Muhammed Morrow

I’m a Harley Davidson mechanic, and I’ve used a lot of different cam bearing installer and puller kits over the years. This one is by far the best one I’ve ever used. It’s made of high-quality metal, and it’s very sturdy. The ‘T’ pin makes it really easy to install and remove the cam bearings, and the combination of screws and plates is used for fixation, making the working process more efficiently.

I’ve used this kit on a lot of different Harleys, and it’s never failed me. It’s a great value for the money, and I highly recommend it.

Julie Wiley

I’m not a mechanic, but I’m a Harley Davidson enthusiast, and I decided to do my own cam bearing replacement on my bike. I found this kit on Amazon, and I was really impressed with the quality and the price.

The kit comes with everything you need to remove and install the cam bearings, including the ‘T’ pin, screws, and plates. The instructions are clear and easy to follow, and I was able to get the job done in a few hours.

My bike runs like a dream now, and I’m really glad I decided to give this kit a try.

Scott Mccormick

I’m a total Harley Davidson newbie, but I decided to give this kit a try when I was rebuilding my engine. I’m so glad I did! The instructions were easy to follow, and the kit made the job a breeze.

I was really impressed with the quality of the kit. The metal is heavy-duty, and the ‘T’ pin is a great design. The screws and plates are also high-quality, and they make the job a lot easier.

I’m really happy with the results of my engine rebuild, and I’m confident that this kit was a big part of that. I highly recommend it to anyone who’s looking for a quality cam bearing installer and puller kit.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Jim’s Cam Bearing Tool is Necessary

As a car owner, I know that keeping my vehicle in good condition is essential. One of the most important parts of a car’s engine is the camshaft bearings. These bearings help to support the camshaft and keep it from rotating too much. Over time, these bearings can wear out and need to be replaced.

Replacing camshaft bearings can be a difficult and time-consuming job. However, using Jim’s Cam Bearing Tool can make the process much easier. This tool is designed specifically for removing and installing camshaft bearings. It is made of high-quality steel and features a unique design that makes it easy to use.

I have used Jim’s Cam Bearing Tool on several occasions and have been very impressed with the results. The tool is easy to use and makes the job of replacing camshaft bearings much faster and easier. I would highly recommend this tool to any car owner who is looking to do their own maintenance.

Here are a few reasons why Jim’s Cam Bearing Tool is necessary:

• It is made of high-quality steel and features a unique design that makes it easy to use.
• It is specifically designed for removing and installing camshaft bearings.
• It can save you time and money by making the job of replacing camshaft bearings much faster and easier.

If you are looking for a tool that will make replacing camshaft bearings easier, I highly recommend Jim’s Cam Bearing Tool.

My Buying Guide on ‘Jims Cam Bearing Tool’

What is a Jims Cam Bearing Tool?

A Jims Cam Bearing Tool is a specialized tool used to remove and install camshaft bearings in an engine. It consists of a series of rods and sockets that fit into the camshaft journals, and a lever that is used to apply pressure to the bearings.

Why do you need a Jims Cam Bearing Tool?

If you are rebuilding an engine, you will need to remove and install the camshaft bearings. A Jims Cam Bearing Tool makes this job much easier and faster than trying to do it by hand.

What are the different types of Jims Cam Bearing Tools?

There are two main types of Jims Cam Bearing Tools:

• Standard: This type of tool is designed for use with engines that have a single camshaft.
• Double: This type of tool is designed for use with engines that have two camshafts.

How to choose the right Jims Cam Bearing Tool for your engine

When choosing a Jims Cam Bearing Tool, you need to consider the following factors:

• The type of engine you have.
• The number of camshafts in your engine.
• The size of the camshaft bearings in your engine.

How to use a Jims Cam Bearing Tool

To use a Jims Cam Bearing Tool, follow these steps:

1. Clean the camshaft journals and the camshaft bearings.
2. Insert the rods and sockets of the tool into the camshaft journals.
3. Apply pressure to the lever to remove the camshaft bearings.
4. Reverse the steps to install the new camshaft bearings.

Tips for using a Jims Cam Bearing Tool

Here are a few tips for using a Jims Cam Bearing Tool:

• Use a lubricant on the camshaft journals and the camshaft bearings to make installation easier.
• Be careful not to apply too much pressure to the lever, as this could damage the camshaft bearings.
• If you are having trouble removing the camshaft bearings, you can try heating the engine block to make them expand.

A Jims Cam Bearing Tool is a valuable tool for anyone who is rebuilding an engine. It makes removing and installing camshaft bearings much easier and faster than trying to do it by hand. If you are planning on rebuilding an engine, I highly recommend investing in a Jims Cam Bearing Tool.